PSR-11-37-52D
Replacement for Analox O2EII oxygen Analyser
Advanced galvanic type oxygen sensor with excellent stability and accuracy under stringent applications. All sensors are subjected to the most extensive stability test, output in air, 30″ of water column pressure test and stability at 100% oxygen. The widest range of oxygen sensors offered by Analytical Industries, Inc. are “Made in USA”
OEM Equipment:
Analox O2EII Analyser
| Measuring Range |
0-100% |
| Accuracy1 |
+/-2% of Full Scale |
| Signal Output2 |
49-75 mV |
| Linearity |
+/-2% of Full Scale |
| Response T90 |
9 sec |
| |
|
| Operating Temp |
0 to 45oC |
| Recommended Storage3 |
0 to 25oC |
| |
|
| Shelf Life4 |
6 months |
| |
|
| |
|
| Warranty5 |
12 months |
| Electrical Conn |
Specific and proprietary micro 2 pin molex |
Conditions:
Specification validated during design and in pursuit of improvement are subject to change without notice
1) At constant temperature and pressure. 2) In air (20.9% oxygen) at 25oC and 1 atm. 3) Sensor may be stored up to 55oC on an intermittent basis, for example, during transportation. 4) In original Package at 25oC and 1 atm. 5) Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries In. will not be liable for buyer’s negligence, misapplication, abuse or accident.
O-Sense